进口铸钢刀闸阀

进口铸钢刀闸阀

品牌:美国威盾VTON

Brand:VTON

产品系列:闸阀

Product series:Gate valve

控制方式:电动，气动，自动

Controlmethod:Manual,electric,pneumatic

压力范围:0-100Mpa

Pressurerange:

口径范围:DN3-1000

Caliber range:

减压范围:高压，常压，低压，微压

Repulating range:High pressure, normal pressure, low pressure, micro pressure

阀体材质:铸钢，不锈钢304、316等

Body material:Cast steel,stainless steel304.316.etc

软密封，硬密封(双偏心，三偏心);衬胶，衬氟

Sealed form:Soft seal, hard seal (double eccentric, triple eccentric); rubber lined, fluorine lined

使用介质:水、油、蒸汽、燃气、空气、氢气、氮气等气体，以及各种腐蚀性流体

Using media:Water, oil, steam, gas, air, hydrogen, nitrogen, gases, and various corrosive fluids

主要特征:密封性能好，耐腐蚀，耐冲刷，耐各种压力和温度

Main features:Good sealing performance, corrosion resistance, erosion resistance, various pressure and temperature resistance

产品介绍

一、进口铸钢刀闸阀概述

进口铸钢刀闸阀（威盾VTON），Cast steel knife gate valve，又名铸钢刀型闸阀，铸钢刀阀，阀体采用铸钢材质，启闭件为刀型的阀板，其闸板具有剪切功能，可刮除密封面上的粘着物，自动清除杂物，不锈钢闸板可防止腐蚀引起的密封泄漏的闸阀。

美国威盾VTON具铸钢刀闸阀有结构紧凑、设计合理、轻型节材,密封可靠、操作轻便灵活、体积小、通道流畅、流阻小、重量轻、易安装、易拆卸等优点，可在工作压力0.6MPa-1.6MPa，使用温度-29-550℃情况下正常工作。主要产品有：对夹刀闸阀，法兰刀闸阀，气动刀闸阀，电动刀闸阀，铸钢刀闸阀，不锈钢板刀闸阀，硬密封刀闸阀，软密封刀闸阀，适用于矿山电厂的选煤、排灰、排渣、城市的污水处理、食品、卫生、医药等专业管道系统。

Cast steel knife gate valve (Weidun VTON), Cast steel knife gate valve， Also known as cast steel knife type gate valve or cast steel knife type gate valve, the valve body is made of cast steel material, and the opening and closing parts are knife shaped valve plates. The gate plate has a shearing function, which can scrape off the adhesion on the sealing surface and automatically remove debris. The stainless steel gate plate can prevent sealing leakage caused by corrosion.

The American Weidun VTON cast steel knife gate valve has the advantages of compact structure, reasonable design, lightweight material saving, reliable sealing, light and flexible operation, small volume, smooth channel, small flow resistance, light weight, easy installation, and easy disassembly. It can work normally under working pressure of 0.6MPa-1.6MPa and operating temperature of -29-550 ℃. The main products include: clamp knife gate valve, flange knife gate valve, pneumatic knife gate valve, electric knife gate valve, cast steel knife gate valve, stainless steel plate knife gate valve, hard sealed knife gate valve, soft sealed knife gate valve, sui for coal ion, ash discharge, slag discharge in mining power plants, urban sewage treatment, food, health, medicine and other professional pipeline systems.

二、进口铸钢刀闸阀产品特点

1.采矿、钢铁工业--用于煤炭、滤渣浆等；

2.净化装置--用于废水、泥浆、污物及带有悬浮物的澄清水；

3.造纸工业--用于任何浓度纸浆、料水混合物；

4.电站除灰--用于灰渣浆液。

1. Mining and steel industry - used for coal, filter slurry, etc;

2. Purification device - used for wastewater, mud, dirt, and clarified water with suspended solids;

3. Paper industry - used for pulp and feed water mixtures of any concentration;

4. Power plant ash removal - used for ash slurry.